My exams just got over yesterday and I desperately needed to do a DIY (Do-It-Yourself) for my brains to run again. My brains get really damaged and tired in exams, so a recharge was a need of the moment. I had always wanted to make a necklace holder and so, I made one today. Please read below to know how I made it :
-A heavy standing support like a glass vase or a simple water bottle with a flat surface at the top. You can fill the water bottle with pebbles to make it heavy.
– Tape and feviquick.
– Decorative paper/lace/ribbons.
Step 1 :
Roll over a thick newspaper and secure it with a firm sticky tape.
Now, you can use paper or any other decorative lace to cover it. I used ribbon to cover it. I first put on tape at the starting and then firmly starting rolling over the ribbon till the ends were completed. The ends too were secured by covering them with tape.
I already had a heavy glass vase lying. So, I used it for standing support and covered its opening with a tape. Then, I put on a cloth on it and tied it with a band.
You can either let the roll remain as it is or cover it with any decorative paper further.
I putted it on the vase top and rolled on ribbon from the top to the end 2 times and finally, secured the ends by pasting it with a feviquick.
If you don’t want to roll over the ribbon, you can directly paste it with feviquick.
You are Done! :D/
Hope you found this DIY helpful. Please do let me know if you make it too 🙂